Table of Contents
Advertisement
3. ENERGY-SAVING FUNCTIONS
1
The power switch of the copier automatically shuts off when the copier is not being used for a specified
period of time. The default setting is "OFF", however, the period of time until the switch is turned OFF is
selectable between 3 and 240 minutes on the "AUTO SHUTOFF" menu.
2
Setting the off-mode
3
This function allows the copier automatically to cut off the unnecessary electricity to the fuser unit when
the copier is not being used for a specified period of time and to stand by with the minimum power
consumption. The default setting is "OFF", however, the period of time until the copier goes into the
sleep mode is selectable between 3 and 240 minutes on the "AUTO SHUTOFF" menu.
4
Setting the off-mode
5
This function allows the copier automatically to lower the fuser unit temperature to stand by with the
minimum power consumption when the copier is not being used for a specified period of time. The
default setting is "OFF", however, the period of time until the copier goes into the energy-saving mode
6
is selectable between 3 and 60 minutes on the "ENERGY SAVE" menu.
Setting the energy saving mode
7
ENERGY SAVER time < AUTO SHUTOFF time
The copier goes into the energy saving mode, then the off-mode or sleep mode.
ENERGY SAVER time
The setting of the off-mode or sleep mode takes precedence and the energy saving mode becomes
8
invalid.
Power consumption and warm-up time at energy saving mode
9
Mode
10
Energy saving
mode
11
Normal standby
*1 With full options: Reversing automatic document feeder, automatic duplexer, finisher, large-capacity
12
- Power consumption and warm-up time are the actual measurements made according to Toshiba's
method of measuring.
- The initial (default) setting of the energy saving mode is Level 1. You can switch the level depending on
the user's environment. User selection
1-10
BEFORE MAKING COPIES
Off-mode (Base model)
Page 6-34
Sleep mode (When the copier is used also as a printer)
Page 6-34
Energy saving mode (When the copier is used also as a printer)
Page 6-33
AUTO SHUTOFF time
Power Consumption
Without
option
Approx.135W
Level 1
Approx.100W
Approx.195W
Level 2
Approx.160W
Approx.230W
Approx.265W
feeder, hole punch unit , drawer modules
Power consumption: Average power per hour
Warm-up time
With full
*1
options
Approx. 2 min. 15 sec.
Approx. 1min. 15 sec.
Page 6-17
Efficiency
Without
option
Approx. 57 %
Approx. 30 %
0
0 %
With full
*1
options
Approx. 49 %
Approx. 26 %
0 %
Advertisement
Table of Contents
