Table of Contents
Advertisement
9
Set the template name.
- Press the area
right to switch to the template name input screen.
10
Enter the template name within 20 letters using the
alphabet (touch panel) and numbers (digital keys),
then press the SET key.
- Use the following keys as required.
...Press these keys to move the cursor.
Backspace ...Press this key to delete a letter before the cursor.
Space
...Press this key to enter a space.
Cancel
...Press this key to cancel entry of letters and
go back to the screen in step 9.
C Clear (control panel)...Press this key to delete all letters.
11
Press the SET key.
12
The setting and registration of the template is
completed.
- If you want to set the other template continuously, press the
NEW key and then perform steps 7 to 11.
as shown on the screen on the
1
2
3
4
5
6
7
8
9
10
11
12
8-21
Advertisement
Table of Contents
