Toshiba e-studio 211c Operator's Manual page 142

Digital colour plain paper copier
Hide thumbs Also See for e-studio 211c:
Table of Contents

Advertisement

7
Confirm the entered file name.
- Perform steps 5 to 6 if any correction is required.
8
Select the destination.
- General description for 'MAILBOX', 'E-MAIL', 'HOLDQUEUE',
'IFAX' and 'FTP'
- After pressing the MAILBOX key
- After pressing the E-MAIL key
* The setting for 'HOLDQUEUE' is completed when the
HOLDQUEUE key is pressed.
- After pressing the IFAX key
- After pressing the FTP key
- More than one destination can be selected at a time. Press
all keys corresponding to the desired destinations.
* 'IFAX' and 'FTP' can not be used at the same time.
9
Press the Setting key to set the scanning conditions.
- If you want to scan with the setting shown on the right (in
the area
The scanning conditions to be selected in steps 10 to 13 may
be restricted depending on the destination selected in step
8. In this case, the keys for items which cannot be set are
dimmed and are not selectable.
10
Change the setting as required, then press the NEXT
key.
- Single/Double sided
SINGLE: Select this when scanning the image which is
printed on one side of original.
BOOK: Select this when scanning the images which are
printed on both sides of original in the same direction (scan-
ning printed images or book duplex printing).
* When this is selected, the originals must be set on the
RADF (optional).
TABLET: Select this when scanning the images which are
printed on both sides of paper in the vertically opposite
direction (scanning printed images of tablet duplex printing).
* When this is selected, the originals must be set on the
RADF (optional).
- Orientation
PORTRAIT: Vertically-long original
LANDSCAPE: Horizontally-long original
* Setting the Orientation is available only when the file for-
mat is PDF. If the orientation of scan image is not correct,
set the Orientation corresponding to the original.
If the file format is changed, the orientation automatically
sets the portrait.
Page 8-2
Page 8-9
Page 8-11
Page 8-13
Page 8-15
), skip the steps 10 to 13.
1
2
3
4
5
6
7
8
9
10
11
12
8-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 311c

Table of Contents