Table of Contents
Advertisement
10
Reinstall the stapler unit in its previous position and
turn the blue lever 90
unit.
11
Confirm that the finisher is attached to the copier,
and that the paper size is set to any size other than
A5-R or B5-R.
- Test stapling cannot be performed when only A5-R or B5-R
paper is available.
12
Close the front cover of the finisher. Test stapling
is then automatically performed on a blank sheet.
- This operation is performed to avoid empty stapling.
If test stapling fails to be performed and the following mes-
sage remains displayed, repeat the above procedure from
steps 1 to 12.
Set staple cartridge
Saddle Stitch Unit (MJ-1020 only)
1
Open the lower cover of the finisher.
o
to the right to latch the stapler
1
2
3
4
5
6
7
8
9
10
11
12
9-23
Advertisement
Table of Contents
