Soft Key Features - NEC UNIVERGE SV9300 DT410 User Manual

• CALLED PARTY IS BUSY
• CALL IS IN PROGRESS
• CALL IS ON HOLD

SOFT KEY FEATURES

The following table describes features supported by Soft key. Also, service description is displayed on the screen
by key.
DISPLAY FEATURE
MIC Microphone On/Off To turn the microphone on and off for handsfree calling.
DIR Dial By Name
HIST. Call History
PICK Call Pickup - Group To answer the call directed to another station within Call Pickup - Group.
FDA Call Forwarding -
All Calls
FDN Call Forwarding -
No Answer/Busy
DND Do Not Disturb
CB Call Back
CW Call Waiting - Set
VOICE Voice Call
CONF Conference -
Three/Four Party
BUSY
11:00 AM SUN 1 JUN 2014
CB CW
11:00 AM SUN 1 JUN 2014
MIC Mute
HOLD
11:00 AM SUN 1 JUN 2014
To search for a desired number in system directory by name.
To display outgoing and incoming call history. By using Call History data, it is
possible to make a call or register to the system directory.
Regardless of the busy or idle status, the incoming call is forwarded to the other
terminal.
The incoming call is forwarded to the other terminal when the terminal is busy
or no answer for predetermined time.
To restrict incoming calls to the terminal. It is possible to make a call during Do
Not Disturb is set.
To set automatic Call Back when a busy or no answer condition is encountered.
When the called terminal becomes available, the terminal that set the Call Back
is called.
When the caller encounters busy, the caller can request to answer the call with
burst tone. The called party can answer the call by placing the original call on
hold.
To alert incoming call by caller's own voice instead of ring tone.
During two parties connection, to add another party to make a conference call.
23
201
>>>>
201
201
DESCRIPTION
INTRODUCTION