Manual Intercom - NEC UNIVERGE SV9300 DT410 User Manual

MANUAL INTERCOM

The Manual Intercom groups have up to six
terminals sharing a common signal path. Users
can call other members of the Manual Intercom
group by pressing a Manual Intercom feature key;
each press sends a tone burst over the speakers
of all the terminals in the group. When another user
answers the call a speech path is activated.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
TO INITIATE
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Press Manual Intercom feature key.
You will receive a ringback tone.
ICM
11:00 AM SUN 1 JUN 2014
MIC DIR
3. Each press of Manual Intercom
feature key sends tone bursts.
TO ANSWER
1. While hearing ringing tone,
Manual Intercom feature key lamp flashes
green. →
You may receive a ring tone.
ICM
11:00 AM SUN 1 JUN 2014
MIC DIR
2. Press Manual Intercom feature key.
Manual Intercom feature key lamp lights
green. →
3. Press Speaker key.
Speaker key lamp lights red. →
201
HIST. >>>>
200
HIST. >>>>
4. If called terminal is engaged in a
non-intercom call, the terminal may
press Manual Intercom feature key
after placing original caller on hold
(with Hold key).
59
FEATURE OPERATION