Call Pickup - Direct; Multiline Appearance - NEC UNIVERGE SV9300 DT410 User Manual

CALL PICKUP - DIRECT

This feature permits a terminal user to pickup a call
to any other terminal in the system.
This feature is set by system data setting at
initial installation. For details, please contact
the system administrator.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press Speaker key.
Speaker key lamp lights red. →
Line key lamp lights green. →
11:00 AM SUN 1 JUN 2014
Recall PICK
2. Press Call Pickup - Direct feature
key.
11:00 AM SUN 1 JUN 2014
Recall PICK
3. Dial the extension number of ringing
terminal.
PICK UP
11:00 AM SUN 1 JUN 2014
MIC Mute
4. Start conversation with calling
party.
200
>>>>
>>>>
210 201

MULTILINE APPEARANCE

This feature allows you to accommodate the lines
(another terminal number) other than My Line on
the Programmable line/feature keys. When
accommodating another terminal number on the
Programmable line/feature key, the user can
answer the call routed to another by pressing the
key that is assigned.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
TO ANSWER A CALL
1. A call is terminated to the terminal
whose terminal number is
accommodated to the Multiline
Appearance feature key.
Call Indicator Lamp flashes.
Multiline key lamp flashes red. →
2. Press Multiline Appearance feature
key.
Call Indicator Lamp goes off.
Speaker key lamp lights red. →
Multiline key lamp lights green. →
3. Lift the handset to start a
conversation.
Speaker key lamp goes off. →
11:00 AM SUN 1 JUN 2014
MIC
When you press a feature key with a call in
progress, the call will be disconnected.
42
FEATURE OPERATION
201
Mute