To Set Auto Path Switch - NEC UNIVERGE SV9300 DT410 User Manual

3. Select the type of smart device.
Select one of the following operations.
• Highlight an item by using
• Press or
(Type1: iPhone, iPad / Type2: Other Smart Device)
For the detail of the smart device vender and model that has been verified
the proper operation, please contact the system administrator.
iPhone and iPad are registered trademarks of Apple Inc.

TO SET AUTO PATH SWITCH

1. Refer to "TO ENABLE/DISABLE AUTO CONNECTION" on page 88
option.
2. Select " Auto Path Switch".
Select one of the following operations.
• Highlight an item by using
• Press .
3. Select the type of smart device.
Select one of the following operations.
• Highlight an item by using
• Press or
, and press
.
[Device Type]
1 Type 1
2 Type 2
, and press
[BCA Option]
3 Smart Device Type
4 Auto Path Switch
, and press
.
[Path Switch]
1 Disable
2 Enable
APPENDIX D TO SET BCA OPTION UNIT
, or Soft key (OK).
Back OK
, or Soft key (OK).
2/2
Back OK
, or Soft key (OK).
Back OK
92
and display BCA