To Set Connection Cycle; To Set Interrupt Ringing - NEC UNIVERGE SV9300 DT410 User Manual

TO SET CONNECTION CYCLE

Connection Cycle is the interval of time to initiate the connection to the smart device through Bluetooth.
1. Refer to "TO ENABLE/DISABLE AUTO CONNECTION" on page 88
option.
2. Select " BCA Connection Settings".
Select one of the following operations.
• Press ,
• Press .
3. Select " Connection Cycle".
Select one of the following operations.
• Highlight an item by using
• Press .
4. Select the interval of time.
Select one of the following operations.
• Highlight an item by using
• Press -

TO SET INTERRUPT RINGING

Using BCA option, it is possible to receive a call from communication server as an extension. Also it is possible
to receive a call to a smart device from mobile phone network. If you are in conversation with one side, the interrupt
ringing will alerts you when there is an incoming call from another side.
1. Refer to "TO ENABLE/DISABLE AUTO CONNECTION" on page 88
option.
or Soft key (OK).
[BCA Option]
1 BCA Connection
2 Interrupt Ringing
, and press
[BCA Connection]
1 Auto Connection
2 Connection Cycle
, and press
, and press or Soft key (OK).
APPENDIX D TO SET BCA OPTION UNIT
1/2
Back OK
, or Soft key (OK).
1/1
Back OK
, or Soft key (OK).
90
and display BCA
and display BCA