To Transfer A Call; Without Announcement - NEC UNIVERGE SV9300 DT410 User Manual

ANSWER TO A TRANSFERRED
CALL (BY EX. 210)
1. Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red. →
The extension number that initiates call
transfer is displayed on the LCD.
11:00 AM SUN 1 JUN 2014
R-TONE MIC
2. Lift the handset to start a
conversation with the extension
(200).
Call Indicator Lamp goes off.
Line key lamp lights green. →
3. Start conversation with transferred
party.
• Extension (200) replaces the handset.
0:00:05
11:00 AM SUN 1 JUN 2014
MIC Mute

TO TRANSFER A CALL

(WITHOUT ANNOUNCEMENT)

After dialing the transfer destination number, it is
possible to replace a handset before answering the
destination party. When the transfer destination
party lifts the handset, it is automatically connected
with transferred party. The phone number of
transferred party is displayed on the destination
terminal.
INITIATE TRANSFER (BY EX. 200)
1. Call in progress.
Line key lamp lights green. →
200
ANSWER TO A TRANSFERRED
DDD
CALL (BY EX. 210)
33
FEATURE OPERATION
2. Press Transfer key.
You will receive a special dial tone.
Calling party is placed on hold.
0:00:05
11:00 AM SUN 1 JUN 2014
MIC Mute
3. Dial the destination extension
number.
You will receive a dial tone.
The dialed extension number is displayed
with flash.
11:00 AM SUN 1 JUN 2014
Recall VOICE
4. Replace the handset.
Line key lamp goes off. →
A call is transferred.
1. Ringing is heard.
Call Indicator Lamp flashes.
Line key lamp flashes red. →
The extension number that initiates call
transfer is displayed on the LCD.
11:00 AM SUN 1 JUN 2014
R-TONE MIC
26-255XX
210
>>>>
200