Suspension Linkage And Swingarm Assembly - Trx Models - Yamaha TDM850 User Manual

Frame, suspension and final drive 6»21
3 Unscrew the nuts and withdraw the bolts
securing the shock absorber and the linkage rods
to the linkage arm (see illustrations). Note
which bolts fit where.
4 Unscrew the nut and withdraw the bolt
securing the linkage rods to the swingarm and
remove the rods.
5 Unscrew the nut and withdraw bolt securing
the linkage arm to the frame and remove the
linkage arm, noting which way round it fits.
Inspection
6 Withdraw the inner sleeves and lever out
the grease seals from the linkage arm and
11.3b Shock absorber to linkage arm bolt
11.3a Shock absorber to linkage arm bolt
swingarm, noting their different sizes (see
(A), linkage rod to linkage arm bolt (B), (A), linkage rod to linkage arm bolt (B),
Illustrations). Thoroughly clean all
linkage rod to swingarm bolt (C), linkage linkage rod to swingarm bolt (C), linkage
arm to frame bolt (D) - TRX models arm to frame bolt (D) - XTZ models
11,6a Suspension linkage and swingarm assembly - TRX models
Staned by Stalker