Figure 42 More Connections Edit; Table 23 More Connections Edit - ZyXEL Communications P-660HW-D User Manual

Chapter 5 WAN Setup

Figure 42 More Connections Edit

The following table describes the labels in this screen.

Table 23 More Connections Edit

LABEL
Active
Name
Mode
Encapsulation
User Name
Password
82
DESCRIPTION
Select the check box to activate or clear the check box to deactivate this
connection.
Enter a unique, descriptive name of up to 13 ASCII characters for this
connection.
Select Routing from the drop-down list box if your ISP allows multiple
computers to share an Internet account.
If you select Bridge, the ZyXEL Device will forward any packet that it does not
route to this remote node; otherwise, the packets are discarded.
Select the method of encapsulation used by your ISP from the drop-down list
box. Choices are PPPoA, RFC 1483, ENET ENCAP or PPPoE.
(PPPoA and PPPoE encapsulation only) Enter the user name exactly as your
ISP assigned. If assigned a name in the form user@domain where domain
identifies a service name, then enter both components exactly as given.
(PPPoA and PPPoE encapsulation only) Enter the password associated with the
user name above.
P-660HW-D User's Guide