Figure 39 Internet Connection (Pppoe); Table 20 Internet Connection - ZyXEL Communications P-660HW-D User Manual

Figure 39 Internet Connection (PPPoE)

The following table describes the labels in this screen.

Table 20 Internet Connection

LABEL
General
Name
Mode
Encapsulation
User Name
Password
Service Name
Multiplexing
P-660HW-D User's Guide
DESCRIPTION
Enter the name of your Internet Service Provider, e.g., MyISP. This information
is for identification purposes only.
Select Routing (default) from the drop-down list box if your ISP allows multiple
computers to share an Internet account. Otherwise select Bridge.
Select the method of encapsulation used by your ISP from the drop-down list
box. Choices vary depending on the mode you select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET
ENCAP or PPPoE.
(PPPoA and PPPoE encapsulation only) Enter the user name exactly as your
ISP assigned. If assigned a name in the form user@domain where domain
identifies a service name, then enter both components exactly as given.
(PPPoA and PPPoE encapsulation only) Enter the password associated with the
user name above.
(PPPoE only) Type the name of your PPPoE service here.
Select the method of multiplexing used by your ISP from the drop-down list.
Choices are VC or LLC.
Chapter 5 WAN Setup
77