Wep Encryption; Figure 57 Wireless: No Security; Table 33 Wireless No Security - ZyXEL Communications P-660HW-D User Manual

Chapter 7 Wireless LAN
If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.

Figure 57 Wireless: No Security

The following table describes the labels in this screen.

Table 33 Wireless No Security

LABEL
Security Mode
Apply
Cancel
Advanced
Setup

7.4.2 WEP Encryption

WEP encryption scrambles the data transmitted between the wireless clients and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless clients and the access points must use the
same WEP key.
Your ZyXEL Device allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys
but only one key can be enabled at any one time.
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
106
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
P-660HW-D User's Guide