Changing The Power Saver Timeout; Saving Paper And Energy With Eco-Mode - Lexmark Prospect Pro200 Series User Manual

To change the temporary settings into new default settings
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Defaults, and then press
3
Press the up or down arrow button to scroll to Set Defaults, and then press
Use Current appears on the display.
4
Press again to select Use Current.
5
Press until you exit Setup, or press another mode button.
To disable the settings timeout feature
You can disable the settings timeout feature if you do not want the printer to revert to the default settings after two
minutes of inactivity or after the printer is turned off.
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Device Setup, and then press
3
Press the up or down arrow button to scroll to Clear Settings Timeout, and then press
4
Press the up or down arrow button to scroll to Never, and then press
5
Press until you exit Setup, or press another mode button.

Changing the Power Saver timeout

The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left idle.
The Power Saver feature optimizes energy efficiency by reducing the printer power consumption (as much as 28 percent
on some printer models) compared to the default printer settings. To save the most energy, select the lowest Power
Saver timeout.
1
From the printer control panel, press
2
Press the up or down arrow button to scroll to Device Setup, and then press
3
Press the up or down arrow button to scroll to Power Saver, and then press
4
Press the up or down arrow button to select a Power Saver timeout, and then press
5
Press until you exit Setup, or press another mode button.

Saving paper and energy with Eco-Mode

The Eco-Mode feature significantly cuts paper usage, reduces paper waste, optimizes energy efficiency, and saves
money.
Note: If you are using Eco-Mode, then the Eco-Mode settings override any changes you may make to individual settings
that are part of Eco-Mode.
.
.
.
Using the printer control panel buttons and menus
19
.
.
.
.
.
.
.
.