Lexmark Prospect Pro200 Series User Manual page 17

Use the
8 Arrow buttons
9 Display
Note: The display is turned off in Power Saver mode.
10 Setup button
Use the
1 Address Book
2 Redial/Pause
3 Dialtone
4 Color/Black
5 Start button
6 2-Sided/Eco-Mode Activate 2-Sided to:
1 2 3
8
To
Access fax numbers from a saved list of numbers.
In Fax mode:
•
Insert a three-second pause in a fax number to wait for an outside line or get through an
automated answering system. Enter a pause only when you have already begun entering
the number.
• Display the last number dialed. Press the left or right arrow button to view the last five
numbers dialed.
Dial the telephone number manually using the keypad before sending the fax.
Switch to color mode or black-and-white mode.
Start a print, scan, or copy job, depending on which mode is selected.
• Print on both sides of the paper (duplex).
Activate Eco-Mode to:
•
Print on both sides of the paper (duplex).
•
Change to Power Saver mode after the printer is left idle for 10 minutes.
•
Set screen brightness to low.
Using the printer control panel buttons and menus
To
Choose a menu or submenu item that appears on the display.
View:
•
Printer status
• Messages
•
Menus
Access the setup menu and change printer settings.
Note: The Copy, Scan, Fax, and Photo button lights are off
when this button is selected.
5
4
Eco-Mode
Cancel
7
17
6