Adjusting Power Saver; Encrypting The Disk - Lexmark C920 User Manual

Adjusting Power Saver

To adjust the Power Saver setting:
1
Make sure the printer is on and Ready appears on the display.
2
Press
3
Press
4
Press
5
Press
6
Using the numeric pad or the right and left arrows on the operator panel, enter the number of minutes for the
printer to wait before entering Power Saver.
The settings available range from 2–240 minutes.
7
Press
Submitting Selection appears.

Encrypting the disk

Warning:
1
Turn the printer off.
2
Press and hold
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
5
Press
Contents will be lost. Continue? appears.
6
Press
The Encrypting Disk progress bar appears.
7
When disk encryption has finished, press
8
Press
To disable disk encryption:
1
Turn the printer off.
2
Press and hold
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
Downloaded From ManualsPrinter.com Manuals
on the operator panel.
until Settings appears, and then press
until Setup Menu appears, and then press
until Power Saver appears, and then press
.
Note: You can also adjust the Power Saver setting by issuing a Printer Job Language (PJL) command. For
more information, see the Technical Reference available on our Lexmark Web site at
www.lexmark.com.
All resources on the hard disk will be deleted. (Resources residing in flash memory or in RAM remain
unaffected.)
Note: This setting is only available when a hard disk is installed.
and while turning the printer on.
until Disk Encryption appears, and then press
until Enable appears, and then press
until Yes appears, and then press
until Exit Config Menu appears, and then press
and while turning the printer on.
until Disk Encryption appears, and then press
Administrative support
.
.
.
.
.
.
Adjusting Power Saver
132
.
.
.