Adjusting Power Saver; Disabling Power Saver - Lexmark W840 User Manual

Adjusting Power Saver

To adjust the Power Saver setting:
1
Make sure the printer is on and Ready appears on the display.
2
Press
3
Press
4
Press
5
Press
6
Using the numeric pad or the right and left arrows on the operator panel, enter the number of minutes for the
printer to wait before entering Power Saver.
The settings available range from 2–240 minutes. If you want to turn Power Saver off, see Disabling Power Saver
on page 106.
7
Press
Submitting Selection appears.

Disabling Power Saver

Disabling Power Saver is a two step process. First, you must turn the variable on, and then select the variable. To disable
Power Saver:
1
Turn the printer off.
2
Press and hold
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
5
Press
Submitting Selection appears.
The operator panel returns to Energy Conserve.
6
Press
Resetting the Printer appears briefly followed by a clock. The operator panel then returns to Ready.
7
Make sure Ready appears.
8
Press
9
Press
10
Press
11
Press
12
Use either the numeric keypad or the right and left arrows to enter 0 (zero). Disabled appears, and then press
.
Submitting Selection appears. Power Saver is now disabled.
Downloaded From ManualsPrinter.com Manuals
on the operator panel.
until Settings appears, and then press
until Setup Menu appears, and then press
until Power Saver appears, and then press
.
Note: You can also adjust the Power Saver setting by issuing a Printer Job Language (PJL) command. For
more information, see the Technical Reference available on our Lexmark Web site at
www.lexmark.com.
and while turning the printer on.
until Energy Conserve appears, and then press
until Off appears, and then press
until Exit Config Menus appears, and then press
on the operator panel.
until Settings appears, and then press
until Setup Menu appears, and then press
until Power Saver appears, and then press
Administrative support
.
.
.
.
.
.
.
Adjusting Power Saver
106
.
.