•
ESC R (Set Default Tabulation Stops) and ESC B 0 will clear all vertical tab
stops.
•
Set the tabulation stops in ascending order (n1.....n64).
•
The last digit in the sequence must be a 0 to terminate the command.
Line Spacing
Set Line Spacing to 1/8 Inch
This command (ESC zero) sets the line spacing at 1/8 inch between each line,
which is 8 lines per inch (lpi).
Format
Decimal
Hex
Set Line Spacing to 7/72 Inch
This command sets the line spacing at 7/72 inch between each line, which
is 10.3 lpi.
Format
Decimal
Hex
Activate Line Spacing for Text
This command activates the line spacing designated by the Set Line Spacing for
Text (ESC A) printer command.
Format
Decimal
Hex
ESC 0
27
48
1B
30
ESC 1
27
49
1B
31
ESC 2
27
50
1B
32
Section 3: IBM Emulation Mode Printer Commands
57