Designing Monospaced Draft Characters - Lexmark FORMS 249X Technical Reference

Printing the Character
To print the ampersand symbol, send the following command sequence:
<x
1B49
04
1B5B64 - ESC,[,@ - select print quality
0100
01
1B5E
26
>

Designing Monospaced Draft Characters

When designing monospaced draft characters, design the character for 10 cpi
output and use as many dot-columns as possible. This method also creates a
better designed 12 cpi draft character.
To design a draft character, start with a grid that is 9 dots wide by 24 dots high.
Although the character matrix for a draft character is 10 dots wide, the last
column must be blank.
130
Section 7: Downloading Characters and Fonts
- ESC,I - select print mode
- draft, 10 cpi
- byte count (low byte first) - x0001, 1
- print quality = Fast Draft
- print one character command
- print character x26, ASCII 38 - ampersand