Notes For Barcode Printing
•
Barcode printing is always performed unidirectionally (left-to-right).
•
The desired barcode will not print if the barcode print area exceeds the
right margin of the printer.
•
The desired barcode will not print if the barcode print area exceeds the bot-
tom of the page or bottom margin.
•
The desired barcode may not print if undefined values are specified for the
command parameters.
Example:
<x
1B5B66
- barcode setup command prefix
0600
- setup data length (low byte first) -
x0006, 6
B5
- barcode type (invalid value for a
barcode type)
00
- module width = default
00
- space width adjustment = default
3804
- height (low byte first) - x0438 = 0.50
inches
00
- control byte
>
Section 8: Barcodes
179