Memory full
Light sequence:
•
Continue—On
•
Ready—On
•
Toner Low/Replace PC Kit—On
•
Error—On
What this light sequence means:
The printer is processing data, but the memory used to store pages is full.
What you can do:
•
Press Continue
(the job may not print correctly).
•
Press and release Cancel
•
Press and hold Cancel
•
To avoid this error in the future:
–
Simplify the print job. Reduce the complexity of the page by reducing
the amount of text or graphics on the page and deleting unnecessary
downloaded fonts or macros.
–
Install additional printer memory (see How to add a memory card on
page 50).
Short paper
Light sequence:
•
Continue—On
•
Ready—On
•
Load Paper—On
•
Error—On
What this light sequence means:
The paper length is too short to print the formatted data. This occurs when the
printer does not know the media size loaded in the tray, or there is a problem feeding
the media.
What you can do:
•
Make sure the print media you loaded is large enough.
•
Open the front cover, clear the paper path, and close the cover to resume
printing (see How to clear paper jams on page 35).
•
Press Continue
•
Press Cancel
Operator panel codes
to clear the message and continue printing the job
to cancel the print job.
to reset the printer.
to clear the message and continue printing the job.
to cancel the print job.
79