Page 1
E232/330/332TECH Technical Instructions Supplies Tools Acetone Alcohol Phillips Screwdriver CORPORATE Soft Lint-Free Cloth Toner and Drum Small Flat-Blade Screwdriver LOS ANGELES, USA Distilled Water Needlenose Pliers US 1 800 394.9900 Cotton Swab Int’l +1 818 837.8100 FAX 1 800 394.9910 Int’l +1 818 838.7047 ATLANTA, USA Photo 1...
Page 2
Lexmark E232/330/332 Technical Instructions Photo 7 Step 7 Rotate the cartridge 180°. Remove the Step 5 developer roller contact from the side of the cartridge. (See Photos 7) Remove the “E” clip that holds the developer roller drive gear. (See Photo 5)
Lexmark E232/330/332 Technical Instructions Photo 12 Step 11 To clean the developer roller, take a lint- free cloth, add a small amount of alcohol Step 16 and soak the cloth in distilled water. Place Install the doctor bar so the bar the developer roller axle into a drill.
Lexmark E232/330/332 Technical Instructions Photo 21 Step 19 Slide the developer roller contact onto the end of the hopper. (See Photo 21) Step 17 Install the keyed end of the developer roller axle into the toner hopper end plate and lower the developer roller into place.
Lexmark E232/330/332 Technical Instructions Photo 26 Step 24 Fill the hopper with toner and install the fill plug. Step 3 Flip the waste hopper onto its Step 25 back. Remove the “E” Clip from Replace the chip found on the bottom of the drum axle on the small gear the cartridge.
Lexmark E232/330/332 Technical Instructions Photo 34 Step 7 Remove the two screws holding the wiper blade. (See Photo 34) Step 5 Remove the drum. (See Photo 32) If you plan on reusing the drum, clean the drum with a soft lint- free cloth and place the drum in a protected area out of the light.
Lexmark E232/330/332 Technical Instructions Photo 39 Step 12 Slide the drum axle into the drum starting on the drive gear side. See Photo # 39. Notes Photo 40 Step 13 Install the “E” clip onto the small gear side of the drum axle. See Photo # 40.
Page 8
IBM released two machines using this new Lexmark engine printers feature a dual consumable printer that uses a sepa- as well. The 1412 is based on the E330 engine that prints rate toner and drum unit designed solely by Lexmark.