Chapter 3: Installing Software For Network Printing; Windows; Installing Software For Direct Printing - Lexmark E 240 User Manual

3
Installing software for network printing

Windows

In Windows environments, network printers can be configured for direct printing or shared printing. Both network printing
methods require the installation of printer software and the creation of a network printer port.
Follow the steps for the printing configuration and operating system in use to configure the network printer:
Printing configuration
Direct IP printing
• Printer is connected directly to the network using a
network cable, such as Ethernet.
• Printer drivers are typically installed on each network
computer.
Shared printing
• Printer is connected to one of the computers on the
network using a local cable, such as USB.
• Printer drivers are installed on the computer attached
to the printer.
• During driver installation, the printer is set up to be
"shared" so that other network computers can print to
it.

Installing software for direct printing

1
Launch the drivers CD.
2
Follow the instructions on the screen. Select the Suggested path to accept the defaults. Select Custom to choose
the software that is installed. The printer is automatically discovered on the network, an IP address is assigned,
and a network printer object is created in the printers folder.
3
Print a test page to verify printer installation.
4
Repeat steps 1–4 on every computer you want to enable to print directly to the network printer.
Printer
Server
Printer
Clients
16
Go to
page
16
Clients
17