Table of Contents
Advertisement
5055-01x
Map 10 - Unrecoverable "Check Tray (X) or Duplex
Connection" Message
Step
Questions / Actions
1
Is the problem with a specific
paper tray or the duplex unit?
2
Is the problem with tray 1?
3
Are connectors CN 35 and
CN36 on the printer controller
board properly connected?
4
Are connectors CN3 and CN1
on the expansion paper feed
control card, for tray 1,
properly connected?
5
Replace the tray 1 expansion
feeder control card. Does this
fix the problem?
6
Are connectors CN9, CN8,
CN7 and CN3 on the
expansion feeder control card
(for the problem tray and the
trays above and below)
properly connected?
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
Problem
solved.
Go to step 7.
Diagnostic Information
No
Go to step 8.
Go to step 6.
Properly
connect the
connectors.
Properly
connect the
connectors.
Return the
tray 1
expansion
feeder control
card and
replace the
printer
controller
board. If the
problem
remains,
replace the
expansion
feeder cable
assembly.
Properly
connect the
connectors.
2-49
Advertisement
Table of Contents
