Table of Contents
Advertisement
5055-01x
Disk Test/Clean
The Disk Test/Clean Test causes the disk to be formatted, destroying
all data on the disk and should not be attempted on a good disk.
This test should only be used when the disk contains unusable data.
Note: This can be an extremely lengthy test depending on the disk
size, and leaves the disk unformatted. See Formatting the Hard Disk
in the User's Guide.
To run this test, select Disk Test/Clean from the DEVICE TESTS
menu. The following message displays to warn the customer that all
disk contents will be lost:
To continue on with the test, press Go.
To exit the test immediately and return to the DEVICE TESTS
screen, press Return or Stop. The Power indicator blinks while the
test is in progress. Once Go is selected, the following screen
displays to indicate the operation has begun:
If the test is successful, the following message is displays.
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
If the test fails, the following message displays.
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
Because of the nature of this operation, canceling of this test is not
permitted.
3-18
Service Manual
Files will be
lost Go/Stop?
Disk Test/Clean
Testing...
Disk Test Clean
Test Passed
Disk Test/Clean
Test Failed
Advertisement
Table of Contents
