Table of Contents
Advertisement
5055-01x
Message
53 Unformatted
Flash
54 Serial Option
<x> Error
54 Network <x>
Software Error
54 Standard or
Std <x>
Software Error
54 Std Par
ENA
Connection
Lost
54 Par <x> ENA
Connection
Lost
56 Serial Port
<x> Disabled
Meaning
The printer detects
unformatted flash memory.
The printer has detected a
serial interface error on a
serial port.
The printer cannot establish
communications with an
installed network port.
The printer has lost the
connection to an external
print server.
Data has been sent to the
printer through a disabled
serial port.
Action
• Press Go to clear the
message and continue
printing.
• Format the flash
memory. If the error
remains, the flash
memory may be
defective.
• Make sure the serial link
is set up correctly and
you are using the
appropriate cable.
• Press Go to clear the
message and continue.
• Press Menu to open the
Job Menu and reset the
printer.
• Press Go to clear the
message and continue
printing.
• Program new firmware
for the network interface
by way of the parallel
port.
• Press Menu to open the
Job Menu and reset the
printer.
• Make sure the cable
connecting the ENA and
the printer is securely
attached. Turn the
printer off and then on to
reset.
• Press Go to clear the
message and continue
printing.
• Press Go to clear the
message.
• Make sure the Serial
Buffer menu item in the
Serial Menu is set to
Disabled.
Diagnostic Information
2-37
Advertisement
Table of Contents
