Table of Contents
Advertisement
5055-01x
Message
37 Insufficient
Defrag Memory
37 Insufficient
Memory
38 Memory Full
39 Complex
Page
4 <x>
Unsupported
Firmware Card
Meaning
The printer cannot
defragment flash memory.
The printer memory is full and
cannot continue processing
current jobs.
The printer is processing
data, but the memory is full.
The print information on the
page is too complex.
The printer detects an
unsupported version of
firmware on the installed
firmware card.
Action
• Delete fonts, macros,
and other data in printer
memory.
• Install additional printer
memory.
• Press Go to clear the
message and continue
printing.
• Press Stop to clear the
message without
deleting print jobs.
• Press Menu to open the
Job Menu and cancel
the current job.
• Press Go to clear the
message and continue
printing.
• Press Menu to open the
Job Menu and cancel
the current job.
• Press Go to clear the
message and continue
printing.
• Press Menu to open the
Job Menu and Cancel
the current job.
• Turn the printer off and
then press and hold Go
while turning it on,
bypassing the code on
the firmware card.
• Remove the firmware
card.
Diagnostic Information
2-35
Advertisement
Table of Contents
