Table of Contents
Advertisement
5055-01x
Message
56 Parallel Port
<x> Disabled
56 Std Parallel
Port Disabled
56 USB Port
<x> Disabled
56 Std USB
Port Disabled
58 Too Many
Bins Attached
58 Too Many
Disks Installed
58 Too Many
Flash Options
58 Too Many
Trays Attached
61 Defective
Disk
2-38
Service Manual
Meaning
Data has been sent to the
printer through a disabled
parallel port.
Data has been sent to the
printer through a disabled
USB port.
Too many output bins are
installed.
Unsupported output bins are
installed.
Too many disks are installed.
Too many flash options are
installed.
Too many trays are installed.
The printer detects a
defective hard disk.
Action
• Press Go to clear the
message.
• Make sure the Parallel
Buffer menu item in the
Parallel Menu is set to
Disabled.
• Press Go to clear the
message.
• Make sure the USB
Buffer menu item in the
USB Menu is set to
Disabled.
Turn off and unplug the
printer. Remove or
reconfigure the output
bins. Plug the printer in
and turn it on.
Turn off and unplug the
printer. Remove the excess
hard disks. Plug the printer
in and turn it on.
Turn off and unplug the
printer. Remove the excess
flash options. Plug the
printer in and turn it on.
Turn off and unplug the
printer. Remove the excess
trays. Plug the printer in
and turn it on.
• Press Go to clear the
message and continue
printing.
• Install a different hard
disk before you perform
any operations that
require one.
Advertisement
Table of Contents
