Too Many Trays Attached; Incompatible Output Bin [X]; Remove Defective Disk; Disk Full - Lexmark C790 Series User Manual

Troubleshooting
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.

58 Too many trays attached

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.

59 Incompatible output bin [x]

Try one or more of the following:
•
Remove the specified output bin.
•
Touch Continue to clear the message and continue printing without using the specified output bin.

61 Remove defective disk

Try one or more of the following:
• Remove the defective printer hard disk.
•
Install a different printer hard disk before performing any operations that require a printer hard disk.

62 Disk full

Try one or more of the following:
• Touch Continue to clear the message and continue processing.
•
Delete fonts, macros, and other data stored on the printer hard disk.
•
Install a printer hard disk with larger capacity.
80.xx Fuser near life warning
1
Order a replacement fuser immediately.
2
When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement
part.
3
Touch Continue to clear the message and continue printing.
80.xx Fuser life warning
•
Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the
instruction sheet that came with the replacement part.
•
Touch Continue to clear the message and continue printing.
189