Error Reading Usb Drive. Remove Usb; Insert Staple Cartridge; Insert Tray [X]; Insert The Hole Punch Box - Lexmark C790 Series User Manual

Troubleshooting

Error reading USB drive. Remove USB.

An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.

Insert staple cartridge

Try one or more of the following:
•
Insert a staple cartridge.
•
Touch Continue to clear the message and print without using the staple finisher.

Insert Tray [x]

Insert the specified tray into the printer.

Insert the hole punch box

Insert the hole punch box into the finisher, and then touch Continue to clear the message.

Install bin [x]

Try one or more of the following:
• Install the specified bin:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the specified bin.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.

Install envelope feeder

Try one or more of the following:
• Install the envelope feeder:
1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Install the envelope feeder.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.
•
Cancel the print job.
179