Table of Contents
Advertisement
Understanding printer menus
PCL Emul menu
Menu item
Font Source
Resident
Disk
Download
Flash
All
Font Name
RO Courier
Symbol Set
10U PC‑8
12U PC‑850
PCL Emulation Settings
Point Size
1.00–1008.00
PCL Emulation Settings
Pitch
0.08–100
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•
Resident is the factory default setting. It shows the factory default set of
fonts downloaded in RAM.
•
Flash and Disk settings show all fonts resident in that option. Make sure
the flash option is properly formatted and is not read/write‑, or
password‑protected.
•
Download shows all the fonts downloaded in RAM.
•
All shows all fonts available to any option.
Identifies a specific font and where it is stored
Note: RO Courier is the factory default setting. The RO Courier format shows
the font name, font ID, and storage location in the printer. The font source
abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
Specifies the symbol set for each font name
Notes:
•
10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
factory default setting.
•
A symbol set is a set of alphabetical and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
Changes the point size for scalable typographic fonts
Notes:
•
12 is the factory default setting.
•
Point Size refers to the height of the characters in the font. One point
equals approximately 1/72 of an inch.
•
Point sizes can be increased or decreased in 0.25‑point increments.
Specifies the font pitch for scalable monospaced fonts
Notes:
•
10 is the factory default setting.
•
Pitch refers to the number of fixed‑space characters per inch (cpi).
•
Pitch can be increased or decreased in 0.01‑cpi increments.
•
For non‑scalable monospaced fonts, the pitch appears on the display but
cannot be changed.
144
Advertisement
Table of Contents
