Checking The Status Of Supplies; Checking The Status Of Supplies From The Printer Control Panel; Checking The Status Of Supplies From A Network Computer; Ordering Supplies - Lexmark C790 Series User Manual

Maintaining the printer
•
High humidity above 80%
• Salty air
•
Corrosive gases
•
Heavy dust

Checking the status of supplies

A message appears on the display when a replacement supply item is needed or when maintenance is required.

Checking the status of supplies from the printer control panel

From the home screen, touch Status/Supplies > View Supplies.

Checking the status of supplies from a network computer

Note: The computer must be connected to the same network as the printer.
1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
•
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
•
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
2
Click Device Status.
The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place where you purchased the printer.
Notes:
•
The toner gauge is an estimate of how much toner is left in your cartridge.
•
All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.

Ordering a print cartridge

When 88 [color] cartridge low or 88 [color] cartridge nearly low appears, order a new
cartridge.
Estimated cartridge yield is based on the ISO/IEC 19798 standard. Extremely low print coverage (less than 1.25%) for
extended periods of time may negatively affect actual yield and may cause cartridge parts to fail prior to exhaustion
of toner.
154