Too Many Trays Attached; Input Config Error; Remove Defective Disk; Disk Full - Lexmark C925 User Manual

Troubleshooting

58 Too many trays attached

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Remove the additional trays.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer back on.

58 Input config error

1
Turn the printer off.
2
Unplug the power cord from the wall outlet.
3
Check if all tray configurations are correct. Remove unnecessary trays if needed.
4
Connect the power cord to a properly grounded electrical outlet.
5
Turn the printer back on.

61 Remove defective disk

Try one or more of the following:
• Remove the defective printer hard disk.
• Install a different printer hard disk before performing any operations that require a printer hard disk.

62 Disk full

Try one or more of the following:
•
Touch Continue to clear the message and continue processing.
• Delete fonts, macros, and other data stored on the printer hard disk.
•
Install a printer hard disk with larger capacity.

80.xx Fuser near life warning

1
Order a replacement fuser immediately.
2
When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement
part.
3
Touch Continue to clear the message and continue printing.

80.xx Fuser life warning

•
Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the
instruction sheet that came with the replacement part.
•
Touch Continue to clear the message and continue printing.
175