Insufficient Memory To Support Resource Save Feature; Insufficient Memory For Flash Memory Defragment Operation; Insufficient Memory To Collate Job; Memory Full - Lexmark 280 User Manual

Check that the paper size is correctly set. For example, if the Multipurpose Tray Size is set to Universal, then make
•
sure the paper is large enough for the data being printed.
Cancel the current print job.
•

35 Insufficient memory to support Resource Save feature

Press the down arrow button until Continue appears, and then press
•
printing.
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit
•
the menus to activate the link buffer changes. When Ready appears, enable Resource Save.
Install additional memory.
•

37 Insufficient memory for Flash Memory Defragment operation

Press the down arrow button until Continue appears, and then press
•
and continue printing.
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.
•

37 Insufficient memory to collate job

Press the down arrow button until Continue appears, and then press
•
stored and begin collating the rest of the print job.
Cancel the current print job.
•
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the down arrow button until Continue appears, and then press

38 Memory full

Press the down arrow button until Continue appears, and then press
•
Cancel the current print job.
•
Install additional printer memory.
•
39 Page is too complex to print
Press the down arrow button until Continue appears, and then press
•
printing.
Cancel the current print job.
•
Install additional printer memory.
•

51 Defective flash detected

Press the down arrow button until Continue appears, and then press
•
printing.
Cancel the current print job.
•
Understanding printer messages
151
to disable Resource Save and continue
to stop the defragment operation
to print the portion of the job already
to clear the message.
to clear the message.
to clear the message and continue
to clear the message and continue