Some Held Jobs Were Not Restored; Standard Bin Full; Submitting Selection - Lexmark 280 User Manual

Restoring Held Job(s) x/y
Wait for the message to clear.
•
Press the down arrow button until Quit restoring appears, and then press
•
jobs.
Note: x represents the number of jobs being restored. y represents the total number of jobs to be restored.
Serial <x>
The printer is using a serial cable connection. The serial port is the active communication link.

Some held jobs were not restored

Press the down arrow button until Continue appears, and then press
Some held jobs will not be restored
Press the down arrow button until Continue appears, and then press
•
printing.
Cancel the current job.
•

Standard Bin Full

Remove the stack of paper from the standard exit bin to clear the message.

Submitting Selection

Wait for the message to clear.
Tray <x> Empty
Load paper in the tray to clear the message.
Tray <x> Low
Load paper in the specified tray to clear the message.
Tray <x> Missing
Insert the specified tray into the printer.
USB/USB <x>
The printer is using a USB cable connection. The USB port is the active communication link.
Understanding printer messages
149
to delete unrestored held
to delete the specified job.
to clear the message and resume