Printing A Directory List; Printing The Print Quality Test Pages; Canceling A Print Job; Canceling A Print Job From The Printer Control Panel - Lexmark 280 User Manual

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the down arrow button until Reports appears, and then press
4
Press the down arrow button until Print Directory appears, and then press
After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and the right arrow button while turning the printer on.
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press the down arrow button until Prt Quality Pgs appears, and then press
The print quality test pages print.
5
Press the down arrow button until Exit Config Menu appears, and then press
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.

Canceling a print job

There are several methods for canceling a print job. The following sections explain how to cancel a print job from
the printer control panel, or from a computer depending on the operating system.

Canceling a print job from the printer control panel

If the job is formatting or already printing, and Cancel a job appears on the first line of the display:
1
Press the arrow buttons until Cancel appears.
A list of jobs appears.
2
Press the arrow buttons until
Canceling <file name> appears.
Note: Once a print job is sent, to easily cancel a job, press
until Cancel a job appears, and then press

Canceling a print job from the computer

To cancel a print job, do one of the following:
.
appears next to the job you want to cancel, and then press
.
Printing
77
.
. The Stopped screen appears. Press the arrow buttons
.
.
.
.