DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual
Creating PPTP or L2TP WAN Connection
To create a connection of the PPTP or L2TP type, click the Add button on the Net /
Connections page. On the opened page, select the PPTP or L2TP value from the Connection
type drop-down list and specify the needed values.
Figure 29. The page for creating a new connection. The General settings and Physical layer sections.
Parameter
Name
Enable
Direction
Physical interface
General settings
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Physical layer
An existing PPPoE or IPoE interface (connection) to which the new
connection will be assigned.
Page 43 of 107
Configuring via Web-based Interface
Description