DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual
You can specify the following parameters:
Parameter
IP address
Mask
Protocol
Public port
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
Figure 54. The page for adding a rule for remote management.
A host or a subnet to which the rule is applied.
The mask of the subnet.
The protocol available for remote management of the router.
An external port of the router. You can specify only one port.
Description
Page 79 of 107
Configuring via Web-based Interface