D-Link DIR-620 User Manual page 45

DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual
Parameter
Connect automatically
A way of specifying the
service name
Service name
Without authorization
PPP Username
Password
Password confirmation The confirmation of the entered password (to avoid mistypes).
Keep Alive
Extra options
IP received
MTU
Interface
Enable IGMP Multicast
Enable RIP
NAT
Firewall
When all needed settings are configured, click the Save button.
PPTP/L2TP settings
Select the checkbox to enable auto-start of the connection upon the
boot-up of the router.
Select a way of specifying the address of the PPTP or L2TP server.
The IP or URL address of the PPTP or L2TP server.
Select the checkbox if you don't need to enter a username and
password to access the Internet.
A username (login) to access the Internet.
A password to access the Internet.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Advanced options of the pppd daemon which need to be specified for
this connection. Optional.
The IP address assigned by the ISP.
The maximum size of units transmitted by the interface.
The name assigned to the connection by the system.
Miscellaneous
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox to allow using RIP for this connection.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Page 45 of 107
Configuring via Web-based Interface
Description
keep you connected to