D-Link DIR-620 User Manual page 68

DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual
The following fields are available on the tab:
Parameter
Client
SSID
BSSID
Network Authentication The authentication type of the network to which the router connects.
When the Open or Shared authentication type is selected, the following fields are available:
Parameter
Enable Encryption WEP
Default Key ID
Encryption Key (1-4)
When the WPA-PSK or WPA2-PSK authentication type is selected, the following fields are
available:
Parameter
WPA Encryption
Encryption Key
When you have configured the parameters, click the Change button.
Select the checkbox to configure the router as a client.
The name of the network to which the router connects.
The unique identifier of the network to which the router connects.
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field and four Encryption Key
fields are displayed on the page. For the
type the checkbox is always selected.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Keys for WEP encryption. The router uses the key selected from
the Default Key ID drop-down list. It is required to specify all the
fields. You can specify keys containing 5 or 13 symbols (use digits
and/or Latin characters).
An encryption method: TKIP or AES.
A key for WPA encryption.
Page 68 of 107
Configuring via Web-based Interface
Description
Description
Shared authentication
Description