D-Link DIR-620 User Manual page 42

DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual
Parameter
IP Address
Netmask
Gateway IP Address
Obtain DNS server
addresses
automatically
Primary DNS server/
Secondary DNS server
Vendor ID
Interface
Enable IGMP Multicast
Enable RIP
NAT
Firewall
When all needed settings are configured, click the Save button.
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Displayed when the Obtain an IP address automatically
checkbox is selected.
Select the checkbox to configure automatic assignment of DNS
server addresses. If the checkbox is selected, the Primary DNS
server and Secondary DNS server fields are not displayed.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. This field is specified when the ISP
assigns an IP address automatically (the Obtain an IP address
automatically checkbox is selected). Optional.
The name assigned to the connection by the system.
Miscellaneous
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox to allow using RIP for this connection.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Page 42 of 107
Configuring via Web-based Interface
Description