Creating Pptp Or L2Tp Wan Connection - D-Link DIR-815 User Manual

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi
Router with 3G/LTE Support and USB Port
User Manual

Creating PPTP or L2TP WAN Connection

On the connection creation page, in the General Settings section, select the relevant value from
the Connection type drop-down list and specify the needed values.
Figure 77. The page for creating a new PPTP connection. The General Settings section.
Parameter
Connection name
Enable connection
NAT
General Settings
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
If the switch is moved to the right, the network address translation
function is enabled. Do not disable the function unless your ISP
requires this.
Page 95 of 240
Configuring via Web-based Interface
Description