DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
User Manual
Creating 3G WAN Connection
You can create a connection of this type only when a 3G USB modem is connected to the router.
Select the WAN connection on the Net / Connections page. On the opened page, select the 3G
value from the Connection type drop-down list and specify the needed values.
Figure 23. The page for creating a new connection. The General settings and Physical layer sections.
Parameter
Name
Enable
Direction
Physical interface
General settings
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Physical layer
Select the USB value.
Page 33 of 107
Configuring via Web-based Interface
Description