Closed Reception (Junk Fax) - Olivetti FK-502 Service Manual

Field Service Ver. 7.0 Jan. 2009
(2) Compulsory memory reception function use
• Set in the [Utility/Counter] > [Administrator Setting] > [Fax Setting] > [Function Setting].
• When this setting is set to disabled, the compulsory memory reception actions are not
performed at reception. In addition, you can not display, erase and print the compulsory
memory reception documents. The compulsory memory reception documents are dis-
played on the main menu irrelevant to this setting.
(3) Compulsory memory reception password
• Within eight digits (eight-digit number)
• Set in the [Utility/Counter] > [Administrator Setting] > [Fax Setting] > [Function Setting].
• This setting is required to display, delete or print the compulsory memory reception doc-
uments.
B. Operation
(1) Necessary conditions for this function
• When there is the compulsory memory reception function, and it is used, the compulsory
memory reception action is performed.
(2) Line seizure
• It is possible to receive up to 100 compulsory memory reception jobs including the nor-
mal reception and the substitute reception. When 100 compulsory memory reception
jobs are received, machine will not catch the line. (Except the case that the polled trans-
mission documents and bulletin board documents are registered.)
(3) Reception
• When the reception is performed in the compulsory memory reception mode, printing is
not performed even with recording paper and the reception is performed in memory as
the compulsory memory reception documents.
• The same as in the polled reception and manual reception.
• The auto forwarding setting is neglected in this mode, and the compulsory memory
reception is performed.
• When SUB is received, related applications will start.
(4) Setting change
• When there are received compulsory memory reception documents, even if the compul-
sory memory reception setting is set to invalid in the utility mode, the compulsory mem-
ory reception file is not printed.
• For printing, the compulsory memory reception setting is required to be set to "ON."
3.3.4

Closed reception (Junk FAX)

• The closed reception function used only at the time of the reception by using the F-code
SID signal.
(1) Closed reception function
• Set in the service menu > [FAX] > [System].
(2) Closed reception function use
• Set in the [Utility/Counter] > [Administrator Setting] > [Fax Setting] > [Function Setting].
• When this setting is set to disabled, the closed reception actions are not performed at
reception.
Y104784-2
3. EXPLANATION OF FUNCTIONS
Service Manual 55