Troubleshooting; Error Codes - Olivetti FK-502 Service Manual

Field Service Ver. 7.0 Jan. 2009

TROUBLESHOOTING

9. TROUBLESHOOTING
9.1

ERROR CODES

Code No. Category
B0-01 FAX board error
B0-02 FAX board error
B0-03 FAX board error
B0-51
B0-52
B1-10 FAX driver error
B1-11 FAX driver error
B1-12 FAX driver error
B1-13 FAX driver error
B1-14 FAX driver error
B1-15 FAX driver error
B1-16 FAX driver error
B1-17 FAX driver error
B1-18 FAX driver error
B1-19 FAX driver error
B1-20 JC
Y104784-2
Contents of error
FAX board error 1 (FAX
ROM check sum error)
FAX board error 2
(DPRAM check error)
FAX board error 3
(FAX Initialization NG)
FAX board installation
error (Line 1).
FAX board installation
error (Line 2).
Instance generation error
or observer registration
error
Configuration space
initialization NG
Semaphore acquisition,
release error
Sequence error among
main body tasks
Message queue control
error
Main body - sequence
error among FAX boards
FAX board nonresponse
(Nonresponse after initial-
ization)
ACK waiting timeout error
Receiving undefined
frame
DMA transfer error
Soft error (Fax board side) Turn OFF/ON the main power switch.
Service Manual
9. TROUBLESHOOTING
How to correct
Pull out and insert the Fax board to
check its installation.
If the trouble is not yet corrected, hard-
ware of the fax board may be defective.
Replace the fax board in such a case.
Pull out and insert the fax board to
check its installation.
If the trouble is not yet corrected, check
if the fax (main) is set to [Unset] on the
[System 2]-[Option board Status] screen
in the service mode.
If it is set to [Unset], set to [Set].
Pull out and insert the FAX board to
check its installation.
If the trouble is not yet corrected, check
if the fax (Sub) is set to [Unset] on the
[System 2]-[Option board Status] screen
in the service mode.
If it is set to [Unset], set to [Set].
Turn OFF/ON the main power switch.
Pull out and insert the FAX board to
check its installation.
131