Table of Contents
Advertisement
Field Service Ver. 7.0 Jan. 2009
Removal of the speaker (d-Color MF45)
4.4.4
• Replace the speaker in the following order.
NOTE
• Be sure to check to see if the main power switch is turned off.
• The board may be damaged due to static electricity. Be sure to take an appropriate
measure against static electricity before conducting the operations.
Wire
Saddle
Y104784-2
4. REPLACEMENT PROCEDURE
1. Turn off the main power switch and
the power switch of the main body
and then unplug the power cord from
the power outlet.
2. Open the front door of the main body
and remove the panel cover. (1
screw)
3. Remove the cover. (1 screw)
4. Remove the connector, remove two
fixing screws and then remove the
speaker.
NOTE
• When reinstalling the speaker, be
sure to check to see if the speaker
harness on the main body side is
seated securely in the wire saddle.
• Reinstall the above parts following
the removal steps in reverse.
Service Manual
69
Advertisement
Table of Contents
