Expansion Vessel - Baxi Genesis 80 Installation And Servicing Instructions

Genesis
CHANGING COMPONENTS – Page 35
Supplied By www.heating spares.co Tel. 0161 620 6677

Expansion Vessel

Hinge down the electrical box.
Turn off gas tap and close all water valves.
Drain as necessary.
Undo all unions between the boiler and isolating valves,
retaining the sealing washers.
Remove the electrical cover, and unplug the input lead.
Remove the earth connection from the grounding strip.
Release the input cables from the cable clamp.
Remove the screws holding the flue elbow to the boiler.
Slacken the screws on the flue clip, and slide the clip along
the air duct.
Slide the rubber seal off the elbow and onto the air duct.
Ease the elbow upwards.
Remove elbow and securing collar.
Baxi Heating Ltd.
35