Table of Contents
Advertisement
8.1.3 Smart QoS
74B
Item
Enabled QoS
When the usage of any WAN's
bandwidth is over___%, Enable Smart
QoS
Each IP's upstream bandwidth
threshold (for all WAN)
Each IP's downstream bandwidth
threshold (for all WAN)
If any IP's bandwidth is over maximum
threshold, its maximum bandwidth will
remain
Enabled Penalty Mechanism
Show Penalty List
Scheduling
Gigabit Multi-Homing VPN Security Router User's Manual
Description
Choose to apply QoS function.
Input the required rate value into the column. The default is 60%.
Input the max. upstream rate for intranet IPs.
Input the max. downstream rate for intranet IPs.
When any IP uses more bandwidth than the above upstream or
downstream settings, the IP will be restricted for the following
upstream or downstream bandwidth settings.
After choosing "Enabled Penalty Mechanism", the device will
enable the penalty conditions internally. When the IP still uses
more upstream or downstream bandwidth than the setting, the
device will execute the penalty conditions automatically.
The IPs which are under penalty mechanism will be shown on
the list.
If "Always" is selected, the rule will be executed around the clock.
If "From..." is selected, the rule will be executed according to the
configured time range. For example, if the time control is from
- 71 -
Advertisement
Table of Contents
