Table of Contents
Advertisement
Item
WAN IP address
Subnet Mask
Default Gateway
DNS Server
Enable Line-Dropped
Scheduling
Gigabit Multi-Homing VPN Security Router User's Manual
Description
Input the available static IP address issued by ISP.
Input the subnet mask of the static IP address issued by ISP, such as:
Issued eight static IP addresses: 255.255.255.248
Issued 16 static IP addresses: 255.255.255.240
Input the default gateway issued by ISP. For ADSL users, it is usually an
ATU-R IP address. As for optical fiber users, please input the optical fiber
switching IP.
Input the DNS IP address issued by ISP. At least one IP group should be input.
The maximum acceptable is two IP groups.
The WAN disconnection schedule will be activated by checking this option. In
some areas, there is a time limitation for WAN connection service. For
example: the optical fiber service will be disconnected from 0:00 am to 6:00 am.
Although there is a standby system in the device, at the moment of WAN
disconnection, all the external connections that go through this WAN will be
disconnected too. Only after the disconnected lines are reconnected can they
go through the standby system to connect with the Internet. Therefore, to avoid
a huge number of disconnections, users can activate this function to arrange
new connections to be made through another WAN to the Internet. In this way,
the effect of any disconnection can be minimized.
- 25 -
Advertisement
Table of Contents
